Gefen 4x1 DVI Switcher Manuel d'utilisateur

®

6BACK PANEL LAYOUTBack Panel52341

7BACK PANEL DESCRIPTIONS1 5V DCConnect the included 5V DC locking power supply to this receptacle.2 In 1 - In 4Each of these ports will accept a DVI s

8IR REMOTE CONTROL UNIT21 Activity IndicatorThis LED will be activated momentarily each time a button is pressed.2 Source Selection Buttons (1 - 4)The

9IR REMOTE CONTROL UNITInstalling the Battery1. Remove the battery cover on the back of the IR Remote Control Unit.2. Insert the included battery int

10Corresponding DIP Switch Settings for each IR ChannelIt is important that the IR channel on the Remote Control unit, matches the IR channel set on t

11Setting the IR channel on the 4x1 DVI SwitcherIn order for the IR Remote Control Unit to communicate properly with the Switcher, both the Remote and

12CONNECTING THE 4X1 DVI SWITCHERHow to Connect the 4x1 DVI Switcher1Connect up to four (4) computers to the DVI inputs on the back panel of theSwitch

13OPERATING THE 4X1 DVI SWITCHERFront Panel Buttons and LED IndicatorsThe front panel of the 4x1 DisplayPort Switcher has a set of four (4) LEDindicat

14Switching sources using the IR Remote Control UnitExample: Switch to Input 1 using the IR Remote Control:1 Press button 1 on the IR Remote Control U

15Switching sources using RS-232Confi gure the Switch for use with RS-232 (see page 14 for details).Example: Switch to input 4 using RS-2321Type 4 then

16RS-232 CONTROLOnly pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication. A null-modem adapter should not be used with this prod

SPECIFICATIONS17Maximum Pixel Clock...165 MHzInput Video Signal...

18WARRANTYGefen warrants the equipment it manufactures to be free from defects in material and workmanship.If equipment fails because of such defects

Rev A8PbThis product uses UL listed or CE listed power supplies.

ASKING FOR ASSISTANCERev A8Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9120Technical Support Hours:8:00 AM to 5:00 PM

CONTENTS1 Introduction2 Operation Notes3 Features4 Front Panel Layout5 Front Panel Descriptions6 Back Panel Layout7 Back Panel Descriptions8 IR Re

1INTRODUCTIONCongratulations on your purchase of the Gefen 4x1 DVI Switcher. Your completesatisfaction is very important to us.GefenGefen delivers inn

OPERATION NOTES2READ THESE NOTES BEFORE INSTALLING OROPERATING THE GEFEN 4X1 DVI SWITCHER• The 4x1 DVI Switcher will take any of up to four (4) DVI si

3FEATURESFeatures• Switches easily between any four DVI sources• Maintains highest resolution single-link DVI at 1920x1200• Discrete IR

4FRONT PANEL LAYOUTFront Panel4213

5FRONT PANEL DESCRIPTIONS1Input Indicators (1 - 4)Each of these LED indicators glows bright blue according to the current DVI input selection (see Inp