Gefen GEF-DVIKVM-848DL Manuel d'utilisateur télécharger pdf (Page 17)

USING THE IR REMOTE CONTROL UNIT

IR Remote Control Key Mapping

Each input and output on the 8x8 DVI KVM Dual Link Matrix is represented by a

button on the IR Remote Control unit. The table below lists the corresponding inputs

and outputs.

Remote Button Monitor / Source

Routing Sources using the IR Remote Control unit

Issuing a routing command is a two step process. The ﬁ rst step is to select the

monitor where the source will be routed. The second step is to select the source.

Example 1

Route the source device connected to In 7 to the monitor connected to Out 3.

1. Press button 3 (monitor 3) on the IR remote control unit.

2. Press button 7 (source 7) on the IR remote control unit.

The source connected to In 7 will be routed to the monitor connected to Out 3.

Example 2

Route the source device connected to In 1 to the monitor connected to Out 1.

1. Press button 1 (monitor 1) on the IR remote control unit.

2. Press button 1 (source 1) on the IR remote control unit.

The source connected to In 1 will be routed to the monitor connected to Out 1.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 48 49

Pas de commentaire

Gefen GEF-DVIKVM-848DL Manuel d'utilisateur Page 17